Review on 🗄️ Sauder Harbor View Lateral File: Stylish Storage Solution in Salt Oak Finish by Stephen Tharpe

The overall quality of this product uses the same "printing glue" as others but this material seems to be of a better quality than most mass produced furniture. It's a heavy box, so be aware, and it's packed fairly well with reinforced corners so the shipping companies are less likely to destroy the panels inside. Text. The only downside to this is that if you have the same type of package as me, you actually need a drill. In section "M63" on page 13 of the instructions you assemble the "cam lock". The problem is that the M63 piece of wood had no holes other than the recess for the 1F camlock piece. You will need to drill a hole in the end of the circuit board for part #2F of the cam lock. Using a slightly larger than 1/4" bit, drill directly into the center of the end of the board, allowing the 2F piece to slide with some resistance. The other end, the pilot hole for the 1-9/16" (30S) screw, should be a 1/8" hole and about 2" deep. Again, be sure to drill straight through the end of the board .I installed the board in the drawer before drilling to make it easier to line up.