Review on 🔥 LG 5220FR2006H Authentic OEM Hot Water Inlet Valve for LG Washing Machines by Sam Davenport

This is the exact same make and part number that I removed from my 2010 LG WM2501HVA washing machine. (USEONG (5F) iv-11s-16) I bought a new washing machine. Very easy installation.1. Turn off the machine2. Put the washing machine away from the wall.3. Turn off the hot water for the washing machine and disconnect the hose from the machine. (Catch water from the hose) 4. Remove the 4 top screws on the back panel holding the 2 gray plastic brackets left and right.5. Grab the top by the center on either side and slide the top back a few inches to remove the top. (I made sure my hands were wet and at the same time slapped my sides and pulled my hands back.) 6. Remove the electrical connector from the valve.7. Remove the 2 screws securing the valve and slide the valve forward out of the machine.8. Squeeze the hose clamp with pliers and slide the clamp forward.9. Remove the hose from the valve. (I used a screwdriver and disconnected the hose from the valve. (Hold the black hose up or collect the water) 10. Reassemble in reverse order. Total replacement time was less than 30 minutes. Rear access door to stop the leak I noticed it was dripping from the top, I removed the top and immediately saw water pouring out of the hot water valve body.