Review on 🖼️ Optimized Peerless SUF651 Black Ultra Slim Flat Wall Mount for 37 to 75-Inch TVs by Robert Moloney

I used this super thin wall mount on a 75 inch Sony TV which is very thin making the "thinness" of my TV even thinner/ mount looks better. It's hard to put into words, but it looks amazing. I was a little nervous installing 75 to the TV using only the top two screws. It works like this: you use the top two holes on the back of the TV with the included screws, which are then hung from a wall plate, so no typical fasteners attach to the TV, just screws. The lower part is only against the wall. TV, it will not detach from the wall plate. In any case, I was nervous about using two bolts, but I checked the mount and its reliability. Just make sure it is properly attached to the wall. Measure before you do anything. near a wall you MUST make sure everything works the way you want it to. I set up the TV and then measured before making any cable holes to allow room for the cables. If you have an old TV that has the power cord plug sticking out the back, you need to get one of those flat cables where it connects to the TV or it won't work. Basically, if you have connections right on the back of your TV, they won't work. They must have connections on the bottom side of the TV. Excellent low profile mount. Makes the setup look amazing. If you're replacing an existing mount and want to use the same power and cable openings, plan ahead first. You may have to go up or down on the TV. I'll add a picture when I get a chance.