Review on 💪 Discover Unmatched Performance with Bosch HC5021 SDS Max Speed X Rotary by Eric Avina

I have this bit along with some other SDS Max bits for drilling holes in rock for installing T-stands and 8x8 wood rods Bought . I bought almost the whole set from 1/2" to 2" 1/2" and they are all designed to drill holes at least 16" deep. The drill I use is a monster with a 25 pound drill head. With those bits, the bedrock couldn't cope. For a T-post, I drilled a hole that was 2 1/2" in diameter and 16" deep. Depending on how hard the surface was, the whole thing took 1 to 5 minutes from start to finish. After drilling a few holes, I attempted to drill a pilot hole knuckle with a 1" bit. This bit cut through the rock, and it was oil. I then finished with a 2 1/2" bit. Not only did this reduce drilling time to a consistent minute or so per hole, but the 2 1/2 inch bit cut through the rock with ease. Wear but still works well and the smaller parts still look new (but used). I'll test them in concrete and expect the same performance as long as I don't hit the rebar.