Review on 🖨️ Efficient Printing Solutions with BuildTak Printing Build Surface Square by Sean Maples

Edit review: it works great! (Read the original review) - I put a magnetic sheet under the Buildtack surface. That way I can take it out of the printer, twist it a bit to loosen the prints from the surface, and return it for the next print. - You can use A4 to level the bed, but just a little more than usual, just a little! You should try this and you will be happy :DOriginal Review:First of all. I only print with PLAnow. I'll write down what I use and it works for me with no issues! I stick it on my old bed 1) I use a 60 degree heated bed 2) I use cardboard to line my bed. no A4 paper because I read before I got that over prints that stick forever so card stock makes the gap bigger. and it works (perfectly) for me 3) Once it cools, I lightly remove my prints with a spatula. very light so I won't straighten it again for the next print. I'll try to use it as a flexible bed soon by putting a magnetic sheet underneath! So the bed can be removed and rotated until the prints pop out!