Review on 🔧 Tuff Country 32900 2-Inch Front Leveling Kit: Enhance Vehicle Stability and Performance by Rosalio Zavala

Great product and does the job well! Installation Notes: - Please allow a full day to complete this installation in case you encounter any problems. - Instructions are not included. You can get them from the Tuff Country website. - You will need a bottle jack or a 2013 factory jack to spread the passenger side front to remove the spring and install the leveling kit. - Take the wheel arch on the driver's side and on the passenger's side. Plastic insert before beginning assembly to allow easier access to the strut and bolts.- Before lowering the front, loosen the brake line calipers on both sides.- Fix the front with 2 jacks and support if possible to lower the front and raise the end after Requirement. Without a jack, lifting is extremely difficult!- Mark all connecting rods and levers before releasing them when lowering the front. You can then line up the marks for assembly. - You will need an 8" extension to access some of the screws. - When assembling, be sure to use a torque wrench to properly tighten the bolts. Raise the truck in your garage. You will need to raise it another 2 inches after installation to reattach the tires. - An impact wrench saves a lot of time! I would recommend 2 jacks per side if rated for 3 tons or less 2013 RAM 2500 weighs 5 tons and you don't have to let it come towards you during installation.