Review on 💦 MSI MAG CORELIQUID 360R: Advanced Rotatable Blockhead Design with 360mm Radiator and Triple 120mm aRGB PWM Fans - AIO CPU Liquid Cooler by Mark Scoggins

Purchased September 2020. I originally set it up with In/Out below and it worked pretty well. The Ryzen 3950 was idling from mid to 30s. I just installed an EVGA RTX 3080 FTW3 and had to place the tubes on top. The processor is currently idling at 60 and all fans are running at maximum. I re-pasted the processor thinking the paste wasn't working due to movement. Back in the mid 60's. Now I think there is not enough coolant in the radiator. The pump is now on top of the radiator. The graphics card also runs cooler under load than my previous RTX 2070 (30 to 50) and the case has very good airflow. I ordered more coolant to check the coolant level and will update the review after I do this. Temperatures have continued to rise since my first check up until this morning. That morning the temperature was so high that the computer kept shutting down due to overheating. I couldn't find a replacement cooler anywhere, so as a last resort I decided to remove the pump and cooler. The coolant I drained looked like dirty dishwater. I found the ducts in the radiator were clogged with white dirt. The pump looked ok. I cleaned it up and put everything back together. It's cool enough to use a computer but far from where it should be. Never been a big fan of MSI but thought it might be worth trying the idea of a pump in the cooler. Never again.