Review on 🔧 Enhanced Productivity with API ELE Warranty Momentary Mounting Self Reset by Ron Collins

Other reviewers are 100% right the instructions are pretty poor. But once you get the hang of it, you'll be very happy with this instant switch. It makes an excellent positive impression and the body is made of aluminum with good workmanship. The rear output is good and I like that you can unplug the wiring from the switch. This particular switch was perfect for my application because I wanted to avoid accidentally using the switch. Here's an application example I've been working with. I needed a momentary switch to turn on the wireless mic. The wires from the radio head were two wires that when connected turned on the microphone. One wire, the black wire, was powered at 5V. The other, gray wire had no power (of course. A simple switch. Connect the two wires together and the circuit is complete). To be very clear, I wanted the LED to be on all the time, and I wanted the press of the switch button to turn the circuit on, rather than breaking the circuit that was already energized. Here is the schematic I used to power the LED (this is completely separate from the switch circuit): - Red wire on switch to 12v button power supply - Black wire to chassis ground Wiring diagram for switching: - Blue wire from switch to black wire from radio with 5V power supply. The green wire on the switch to the gray wire to the radio head completes the circuit. * The yellow wire is not used for this configuration! Hope this helps you!