Review on 🚪 LiftMaster 890MAX Mini Key Chain Garage Door Opener Remote 2-Pack, Black w/ Gray Buttons - Enhanced for SEO by Billy Donalson

on garage door opener and programming button on remote control. You also need to make sure the opener has a working light, as the light will flash to indicate the remote has been paired with the garage door opener. The front of the remote control turns on. This puts the remote into programming mode. 2) Press and release the "learn" button (it will be a square green, red/orange or purple button or a yellow round button) on the garage door opener. The learning LED lights up for 30 seconds. 3) Press (once if the learn button is yellow, twice if the learn button is purple, 3 times if the learn button is red/orange, or 4 times if the learn button is green) and release one of the 3 buttons dem los remote control. Buttons you want to use/program. 4) Wait for the remote control LED indicator to light up, then slowly press and release the button on the remote control. Repeat until the garage door opener light starts flashing. DO NOT press the button after the light flashes. 5) To exit programming mode, press any button on the remote control other than the currently programmed button. 6) Press the programmed button on the remote control to verify. The garage door opener, gate or MyQ light accessory should now activate.