Review on 💡 DLLT 4.72-Inch LED Ceiling Light Fixture for Closet Bathroom Dining Room Laundry Room, 12W Flush Mount Ceiling Downlight, 6000K Cool White, AC 110-220V by Jermaine Munajj

The luminaire comes with an LED driver that can be separated from the luminaire itself. This is both a blessing and a problem as vertical space for an LED driver is very limited. If you put it in a box, it's better to put the driver in a box. The bracket that comes with the flashlight is really flimsy and the holes don't fit the US box. Therefore, expect to drill the bracket. Not repairable, but annoying. Your "ground wire" is connected to the bracket via a screw and it's not like it's out of contact with the bracket as it's screwed on top of the paint. So you need to remove the ground wire and scrape off the paint. and fasten. If you like me, ie drill the bracket and your box will be grounded, scrape off the paint next to the drilled hole. OK. so the mount is in place. Did I mention it's FLIMSY? he bends at the touch. So be prepared to use a whole lot of well-chosen swear words as you try to tighten the screws that hold the flashlight to the mount for quite a while. After that, the light becomes bright, but with a significant switch-on delay. If the fluorescent lamp has been replaced, the delay will be shorter. If you have worked with more modern and high-quality LED lamps, then you understand that the lag is too much. But for money. This is further proof that you get almost what you paid for.