Review on 🔍 NICECNC Right-Hand 10mm Stem Mirror Mount Risers Extenders Adapters - Enhance Motorcycle Visibility! by Sandro Pierce

Installed on a 2019 Honda CB1000R. The mirror extension is very useful. You can see behind you much better. It could be longer, but you have to draw the line somewhere. CB1000R has an adapter for mirrors. There is a right hand thread on the bottom and a left hand thread on the mirror rod. You can use this extension. Remove the adapter and mount the extension to the handlebar with the supplied right-hand thread screw. Place the adapter in the extended position and screw it into the right-hand thread. Insert the mirror shaft into the left-hand thread of the adapter. It's the same for both sides. The adapter acts like a turnbuckle for tightening or loosening a rope. You can hold the mirror and tighten the adapter. Not the only way to do it, just an option. I had a similar device delivered to the wrong address. After contacting the company they tracked it down, admitted it was delivered to the wrong address (next day) and immediately sent me another one. DHL tracking is as good as Revain. So, great customer service! The mirrors held up well, but since I bought the blue Locktite screw lock, I put them on after a test ride anyway.