Review on 🚤 DaierTek Waterproof Toggle Switch 12V LED Lighted Toggle Switch IP67 12 Volt RGB (Red Green Blue) 16mm Pre-Wired for Car Boat Marine - Pack of 3 by Richard Koh

It is quite difficult to connect the cable as the switch moves off the ground to make the connection. The wire in the built-in fuse, on the relay and the rest is standard with a jumper of 30 on the relay to your plus 12V. One wire to the accessory, the other wire to the switch. Use the black (ground) wire on the switch to make the connection and activate the relay for your lights. Or what you feed. Common ground (white) to chassis, connect power-up color to black, then black to negative side of relay. Combine your color with orange. Start the yellow LED on the switch so that it lights up with the ignition key. The switch works great once properly plugged in, a steady on and off. It seems like it should take a while.