Review on Dorman CC649048 Clutch Cylinder Assembly by Dave Connelly

Ok from product perspective. but at the time of writing this review I cannot judge its performance due to an installation issue due to a very important part that is NOT included or lost during shipping. I'll explain something about photography. This plastic disc, located in the neck of the master cylinder behind the clutch pedal switch; must be included with the delivery of this product. Because; If you ever install a block without this washer, for those of us with a clutch pedal switch. The car will never start or run. Another downside is that if you make a mistake installing the pusher and it's not there, the pusher can't come back to fix it unless you mess up the end of the pusher. You then have to CUT the plastic disc to put it on the bar, which reduces its hardness as a disc. For example, use the old one as it might be worn out or damaged due to the old device. INSTALL THE NEW WASHER with the new block. I almost thought my foot switch was faulty until I discovered that without the washer the switch didn't have enough clearance to make contact with the PINS and you would blame the switch, starter, battery, relay or even the fuses . So it's like I almost wrecked my entire truck thinking it was something else until a friend told me to jump the cable and see if it would start. then I notice that my truck has no problems; THE ENTIRE PROBLEM WAS A MISSING PLASTIC WASHER IN THE TANK HEAD behind the switch, allowing the switch to make contact with its components. PLEASE SEND MY WASHING MACHINE. You can even call me at 1-284-547-9695 Frederick.