Review on 🔳 Black Leviton 80401-NE 1-Gang Decora/GFCI Device Wallplate - Standard Size, Durable Thermoplastic Nylon, Device Mount by Brian Unruh

I bought a light switch that didn't work in the room we bought it for. This meant we had to buy the outer part to use in another room, which we did. Same brand as the switch, they work great together and look great. Went with gray because the original switch was supposed to be gray in the original room. It had a wall plate with three holes in black and we thought the gray color would look nice as the other holes were covered with black plugs to hide the problem spot left by the previous owners of the house and the gap on one side close of the house old house. switch plate. The problem was that the lamp itself did not fit the ceiling. So it's a tricky situation and we ordered 3 different lights in total. The last one finally fit but needed another dimmer and now we had too many but didn't have a panel with the right hole size for it. This is his girlfriend and they are perfect. The colors are just right. So the lamp can now be lifted into another room. We are slowly trying to convert the whole house to LEDs. If not with light bulbs, then with LED lamps themselves. The builders of this house left the original huge square hole, which was almost impossible to find for a round fixture. The originals are sunk. A few years ago we decided not to remove the niches in the stairwells and to install the same model, but smaller, in the hallway. This bigger one needed a worse update and it was fun getting creative to get there. Many LED bulbs are not safe to install indoors. So the drowned had to go. We did that 20 years ago. But those expensive glass fittings broke and it was hard to find round bulbs that size these days. So finally a big enough round LED light was found that was actually big enough and flush enough to close that hole without breaking. And here on Revain too. And it works great with this switch and its frame.