NANPU Air Drying System With Double Filters And Pressure Regulator Combo For Clean And Controlled Air Supply Review

While the overall unit is well built, the gauge that is included is complete junk! Even with teflon tape, I cannot get the gauge threads to stop leaking.ALSO - the gauge measures in increments of around 12.5 psi, so it's impossible to get a perfect 85 PSI, 90 PSI, etc. setting. While this is just minor, it's disappointing since most instruments use increments of 2, 5, or 10 for ease of reading and adjustment. As a result, I'll probably be changing the gauge out in the future, with hopes that…

It's a bit smaller than I expected but does work. You may find you'll need to add another in-line filter if you mount it too close to the compressor.

Worked okay but the air fittings are plastic and not strong they broke really easy. Not compatible with certain air tools. Plan on buying some good ones

So far everything has been great. I did not use any of the included fittings due to already having Poly tube fittings. So far no leaks and setup was very easy.I will update if anything changes.

It works fine. I received the item in excellent shape except for the gauge. The glass has a huge crack in it. It still functions correctly so not a big deal. This is really heavy duty.

I’ve had it for about a year and it doesn't seem to filter water out very well. I will see moisture shoot from my air chuck sometimes. I was wondering if I could swap out the filtering material with desiccant instead. Ive never see water or even moisture even form inside the cups. Anyone else ?

I did NOT use the brass fittings as they seemed loose and the gauge bottomed out against the housing. However, I used standard MPT couplers and put twice as much TFE on the gauge so even bottomed out it is oriented correctly and doesn't leak. Lots of good clean air flow now!

I was surprised while trying to reverse mount the NANPU ! After you remove the mounting bracket screws the unit came apart in several pieces. I was expecting the mounting bracket to come off not the entire unit to be rebuilt .it wasn't hard just unexpected.

I bought this setup as a secondary regulator and air dryer off my primary on the 30 gallon compressor to use with my airbrushes. It’s great! Small footprint, easy to mount with a couple screws to the end of my workbench and for me the best part of it all is the dial indicator for pressure settings. Most dials are for high pressures and the BAR setting is the primary measurement. This setup is perfect for me because not only is PSI the primary display ( BAR is still there ), but it is centric to

I bought this and it works amazingly with my stationary air compressor. I experienced an issue and reached out to the customer service. It was so quick, easy, and they sent the replacement accessory for the piece that wasnt functioning.After a while, the same issue happened (im thinking its not product malfunction at this point). I reached out again and they were so patient and understanding. They have full confidence in their products and were happy to replace the part again. I definitely…

The filters themselves are nice , easy to flip the bracket around for left to right install, compact perfect for my small compressor, it’s exactly what I needed

Everything worked great from the installation to the function, its just the gauge itself has a small leak, I sprayed windex on it and sure enough bubbles from the inside of the gauge, If this company could send me a new gauge things would be great.

Better quality and for a cheaper price than the one I purchased from lowes. Holding 150psi for a few days now Thanks for attention.

Neer had a filter on the air compresser until I decided to drain it one day. Now it is part of the compressor setup and my air tools are much happier.

It came on time. It's small, so good for air brush and such. My mistake getting it and not paying attention to it's size for what I need it for. But I will add it to the in line anyway. It's not the best by far but does work. Get what you pay for situation.

We had remove a ton of paint from inside the threads that wasn't smooth and use a ton of teflon tape to establish a seal with the compressor hose. Really not happy.

I needed a regulator that would work with the pressure my system has. The air gauge only goes to 150 PSI but the description said it was rated for 175 so I gave it a try. It's smaller than I thought but it works well and so far is working with the higher pressure I'm using. I mounted on the side of a work bench so it's very practical and I'm very happy with it. I would not hesitate to purchase more.

The system works great and was easy to install. It would have been perfect if the provided thread tape wasn't cheap garbage. I installed the system and found all the thread fittings leaked air significantly with the tape provided. When i re-taped the fittings with quality thread tape there were no more leaks.