NANPU 1 FRL Air Filter Regulator Lubricator Combo With 0-150 Psi Gauge, 5 Micron Brass Element, Poly Bowl & Semi-Auto Drain - Metal Bracket Included Review

Pros:Sturdy metal housing.Wall Mount is built on the unit.Small profile for home use.Cons:Plastic fitting didn't work well with my existing metal fittings.Recommendations:If you have extra metal fittings use them instead of the plastic ones included, don't even bother with the plastic ones that this comes with.I would also recommend that you purchase the metal fittings if you don't already have them.

I thought this product looked like it would do a good job of removing water from the system. It does. Lots of water goes to the clear separator. The drain valve is a little odd. At first I could not get it to seal. I had to let the system depressurize and sit overnight twice. After that it holds just fine. I did not use the Oiler but it seems well made as well and is easily separated from the filter. You can’t beat the price either. I ended up removing my existing gauge and installing it to…

Product is fine. my issue is how amazon is bow sticking their nose into political affairs. I'm done with amazon Thanks for attention!

I have purchased this bread before and had no issues, however this time it was leaking within hours of install. leaked from the bowl of both the regulator and lubricator and seemingly from the body castings of both. We have low line pressure of 120 PSI, within the published ratings so it should not have been a problem.

It works as intended but the air gauge is cheap and started leaking air from inside. Had to remove and put plug in it’s place.

This regulator seems to be working as it should. I have not had a chance to really check if the pressure is accurate but it is filtering out water. I wish it had a better adjustment valve. All and all I like it for the money.

Seems like a decent product, however, it was missing the owners manual. Not sure if I will need to return it and exchange it for another one that may or may not have an owners manual, or if the seller or mfg can provide a PDF of manual. Kind of exasperating that they ship products with no instructions nor owners manual, and then wonder why they get returned as defective after failed installations.

Good unit for the money, would love for it to have an outlet between the filter and oilier as a dry air outlet. Good thing abut these units you can break them down and add an outlet.

We've not had the item long enough to appreciate the potential for its affects and elimination of moisture as well as oiling our very critical air actuated hydraulic pump. One recommendation would be to include some operating instructions especially for the oiler and its initial settings.

got it all hooked up, just to find out that if you have it set to anything lower than 105psi it leaks air around the knob every time you start your compressor till you turn it up all the way, then turn it down to the pressure you want. this is a pain to have to do every time i start my compressor. my compressor is only 130psi max so i know i aint over driving it. the 2 fittings are cheap and don't fit standard 1/2 npt fittings. and the quick connect is plastic. dont waste your time with this…

Product works as described. Removes / separates debree from compressed air, with a regulator to control air pressor That's my review!

The fittings that came with it were crap but the rest was good and has been well used in my shed daily for months now no problem

not got to really got to use it yet only checking for leaks and so far it seams fine easy to use and well made That's my feedback.

This was a surprise. I thought for the price it would be junk, I was pleasantly surprised. There is really no down side. It is surprisingly compact and can be installed anywhere. I didn't really care for the 1/4" pipe as I would much rather have had 3/8". The little guy did do the job.

This is a great replacement for my old regulator/oiler that started leaking. It came with brass nipples that saved me a trip to the hardware store and even came with teflon tape.

Purchased this as a replacement on an aging Ridged air compressor. I mostly only use this compressor for running a plasma cutter which needs 30 psi. So far this unit works just fine.

After 1 hour of continuous use I still get water in my air tools . Trying to use spray gun and am getting water. Thanks for attention.

This never seemed to get sealed up. Right from the start it leaked between the water separator and the luber. I disassembled it and made sure the o-ring wasn't compromised, lubed it with a bit of grease and reinstalled. I made sure everything was nice and tight. to no avail. Then, it started leaking from the automatic water drain. I'm done

It does the trick. The pressure adjustment knob is pretty flimsy so not sure how long it will last. It feels like it's going to break every time I turn it. Instructions are almost in English. The quick connect is useless. It'll do until I can find my spare though.

Had some cheap filters and was wondering why I was getting water and decreased air rating at the gauge. Read about the best for the money for consumers snd they work great. Well worth it for me. Now if you use yours for commercial applications I suggext a larger moder, maybe even a dryer