Review on 🛻 Rhino XL Double ATV Holders - Kolpin 21515 (Pair) by Craig Galante

I bought these lots to convert a very run down Bob Revolution stroller into a working shotgun buggy. I use this buggy for target shooting at my local shotgun club and it makes it much easier to carry two shotguns and ammo to 14 stations. Shotgun mounts work great. There is no problem with the gun slipping or falling out even when the seat belt is not in use. Loading and unloading the gun is easy, making life on the shooting range a lot easier. Unfortunately, the clasps are a bit worn. The description said it would come with long and short hardware. Mine only came with long 3" bolts. Bolt heads are soft and deform easily. The amount of energy required to thread a nylon-filled nut onto a bolt is too much for the grooves in the bolt head. This causes the bolt head to become almost ripped it off. I went to a hardware store and bought hardware for $10. I settled on a lock washer nut instead of a nylon filled nut. Since I'm not putting it on an ATV, this gear is more than enough for 5 mph when we drive from station to station By the way the Bob Revolution stroller makes a great shotgun buggy Very stable even with two guns on one side There are a few modifications you need to make to the bob spin but this can be done easily done by loosening a few screws that hold the nylon to the frame, there is no need to cut or perm the changes, you can a Can be found on Craigslist for $70.