Review on 🧵 Sew-link Sewing Machine Single Fold Tape Binder Binding Attachment with Swing Bracket - Size 1 inch for Effortless Binding by Kristen Reid

The crease in the feed area of my 1" Sew-Link binder is pushing material away from the binding tape. The crease should line up straight with the guide exit, but this is folded too far to the left. This makes it difficult to keep the material fully inserted into the binding during sewing. This is especially true for stiff material like window vinyl or polycarbonate. The other 3/4" binding I have doesn't because feed and feed line up. Unfortunately, I didn't realize what the problem was until it was too late to go back. As others have said, I did also didn't get the thumbscrews so I had to buy them from a local sewing machine dealer.It fits my Juki-1541S without the need for a single sided presser foot.Updated 2/8/2021 - I've changed your rating from 1 to 4 stars.After I. After bending it with pliers and attaching it to the machine at the maximum counter-clockwise angle (only a few degrees) I was able to get it to work, but it should still work without modification, you'll also need to lift the material to make sure it is fed straight down the center (vertical) of the infeed, otherwise the metal flanges will tend to push the material out of the stitching line.