🧵 Sew-link Sewing Machine Single Fold Tape Binder Binding Attachment with Swing Bracket - Size 1 inch for Effortless Binding Review

Although no mounting screws were included I used standard thumbscrews to attach the Juki DNU-1541S clone. The supplied screws are used to mount the binding. Standard needle thumbscrews are long enough to secure the binding to the table and have the same thread size and pitch as the included screws. ?ie=UTF8&psc=1 I have the 2 screws I needed and the rail. The tie worked fine, I used 1" cable ties, hole size 1 3/32", 27.86mm. I had no problem with heavy material for the cabin of the boat. The…

Wow! This machine attachment is ideal for processing cut edges. Attaching polypropylene piping to Sunbrella canvas produces amazing results with minimal practice stitches. I watched a YouTube video on how to attach; came without instructions. Got it done in about 20 minutes. Mine was mounted on a 'rigid' bracket which had to be removed in order to mount it to the car with a fold out arm. Installation was easy once I figured out which part I was going to use. For reference I have a Brother…

The crease in the feed area of my 1" Sew-Link binder is pushing material away from the binding tape. The crease should line up straight with the guide exit, but this is folded too far to the left. This makes it difficult to keep the material fully inserted into the binding during sewing. This is especially true for stiff material like window vinyl or polycarbonate. The other 3/4" binding I have doesn't because feed and feed line up. Unfortunately, I didn't realize what the problem was until it…