When I first received it I examined it carefully before installing it. The surface of the cooling plate was ground with a very coarse abrasive. It wasn't smooth at all, my fingernail made a flashing noise and caught on the marks they used to sand down the heat pipes so they were flush with the aluminum heatsink they were embedded in (which weren't flush anyway). I took a sheet of 2000 grit sandpaper, taped it under tension to my glass table and rubbed it against the cold surface of the slab. After that, the heatpipes were flush with the heatsink and the surface became much smoother. I also paired it with a Noctua NF-F12 iPPC 3000 PWM fan instead of the included fan and used the Inovation Cooling Graphite thermal camera. Gasket instead of thermal paste. Set it up as I did, and after trying my best, my AMD FX 6300 never went above 35C when testing Cinebench R23. TLDR: The cooler itself works great but needs to be made better. I'm not sure about the fan as I didn't use one.
AMD Phenom II X4 940 ๐ป Black Edition 3.0GHz AM2+ Processor - Retail
96 Review
๐ Power Up Your Gaming Rig with AMD Ryzen 5 2600 Processor with Wraith Stealth Cooler - YD2600BBAFBOX
116 Review
๐ฌ๏ธ Silent Cooling Power: Dark Rock Pro 4 CPU Cooler with 250W TDP, BK022
134 Review
Deepcool GAMMAXX 300 CPU cooler, silver/black/blue
166 Review
Glarks 660 Pieces Phillips Assortment Motherboard
10 Review
๐ฅ๏ธ Helifouner 450-Piece Computer Standoffs Spacer Screws Kit: Ideal for Hard Drive, Motherboard, Fan, Power Graphics & Computer Cases
10 Review
M.2 Screw Kit: Easy Mounting for NVMe SSDs on ASUS Motherboards
19 Review
MacBook Retina 13-inch (A1425, A1502) and ๐ฉ 15-inch (A1398) Bottom Case Screw Set with Pentalobe Screwdriver
11 Review