Review on Chairman GAME 16 Computer Chair Gaming, Upholstery: Artificial Leather/Textile, Color: Black/Red by Micha Kumicki ᠌

I do not recommend buying! I've been using it for a little over a year. This chair is just awful. At first, I was only annoyed by the crooked painting of the material of the armrests. after a while, I began to notice that I was not sitting straight, but slightly to the side. I was sometimes annoyed but it was tolerable. Then one day, leaning on the back, the bolt just broke. Which is screwed into the armrest (seat mounts) and I almost fucked up. As a result, I decided to disassemble the chair in order to unscrew the part of the bolt that remained in the chair. Oh, what kind of plasticine silumin are these bolts made of, I thought, and began to disassemble the chair. And then it began! in order to remove the cover, I had to pull out the zippers of the seat cover, because they were without straps and did not move in one direction or the other. throwing back part of the leatherette, I saw the armrest mount, but in order to unscrew it, it was necessary to move the foam rubber. which "Nafiga" glued to the plywood base ! I tore off the foam rubber from the plywood, removed the armrest mount, unscrewed a piece of the bolt from the thread "it's good that there are no problems here" and when I wanted to put it I saw that: "Firstly, the plywood to which the curved seat is glued!", "Secondly, there is a crack in it! " Outcome: Of course, I'll fix everything myself. I'm going to buy normal bolts at a regular hardware store. I'll cut out a piece of plywood to replace the one that was installed. I'll put new dogs with zippers. Perhaps I’ll change the gas lift because the one that goes well, frankly, is not very good. Well, since such a dance, I’ll change the wheels to normal ones, and not to the “G” that was supplied from the factory. PS: I smoked this chair because of the armrests, since I owned the DIK 2 chair for more than 10 years and there was a similar system. And I changed DIK2 because leatherette began to crumble. And it cost the same amount to pay for a constriction as to buy a new one. Now I regret It was necessary to give the old chair for constriction and continue to use it.