Review on 🧥 Black Coat Rack Umbrella Stand by Angela King

This is a positive review, I like this hanger. I've read other reviews discussing the clarity of the instructions and as I've had no problems I'll share some tips that I think will help other buyers with their build.1. There are 2 screws of different lengths. Although it is stated in the user manual, it is not 100% clear in which phase the shorter screw is used. This is the step where the shield bracket will be installed. So first separate the screws from long/short.2. The tire is tricky to install, leave the bolts loose in this step until all three are in place. It comes together, but if you have two screws in place and they're too tight, the third one won't come together. There are plastic caps that cover the interrogation thread.4. First place the plastic parts that will serve to cover the legs and close the hangar parts and then screw them. Use a hard surface that you enjoy scratching and press on it. Pushing it in by hand didn't work and seemed like a good way to cut my thumb. I had three metal hangars bolted on before realizing what I needed to do. It can be a little cheesy with a heavy coat on a hanger, but if you balance the weight with a few other coats or sport shirts, you should be fine. It's a decent shelf for the price and I like it. If it flips too much in the future I'll update this review.