Review on Adjustable KMFCDAE Dead Pedal: Left Side Foot Rest for Jeep Wrangler JL/JLU & Gladiator JT 2020 (Wrinkled Black) by Tim Hull

Type-C Bracket Pictures show the bracket installed backwards. Follow the installation instructions in Nash Djordjevic's international review and everything will go smoothly. I'm 5'11" tall and used the average of three possible positions where my left foot is about 2" from the brake pedal - at the same height as the accelerator pedal. Ideal for me. If you are short or want the pedal positioned with the brake pedal, use the position closest to the driver's seat. NOTE: The nut protruding through the Jeep wall mount and behind the footrest is the most difficult to install. First attach the pedal to the Swoosh mount. The two fixed bolt bracket sits in the rear and protrudes through your Jeep's side panel bracket. I pushed one bolt in a little and tightened the nut a few turns to secure it, then pushed the other in. I also used a piece of tape to hold the bolt mount in place while I removed the nut I installed during installation and slid the attached footpeg bracket over the exposed bolts. After the footrest bracket was attached to the exposed bolts, I applied blue threadlock, fitted the next 10mm washer and nut (the most accessible), then fiddled with the other behind the footrest.