Review on Enhance Your Jeep Wrangler JK 2007-2018: Adjustable Mount Spare Tire Backup Camera with RCA Harness by Mario Hernandez

Well the camera has excellent picture quality and mounts directly to the spare tire bracket. Now the most interesting. I hook it up to an aftermarket auto switching radio. turning back. If you're doing the radio setup at the same time as me, this might help. Install the radio first, then connect the camera cable to the appropriate connector on the radio. Then route the cable along the left side of the glove box, you can now route the cable under the shifter console and to the rear. (2 dr without rear seat) Route the cable under the carpet to the rear corner and under the plastic support and around where the other cables go to the tailgate. Plastic can be torn off the case. Remove the tail light as the tail light is incandescent and regular black. Inside the hole there is a socket with a wire, we pierce a hole in it and push the power wires through it. Hook the appropriate wires. Remove the plastic strip on the back of the rear door, pull from the bottom. Remove the replacement bushing from the front. There is an extra hole inside. Insert the wire from the back, you should see them and be able to grab them with a pair of needle noses. Cut the socket from the center to the outer edge, insert the wires and replace. Now the only hot wire I used was on the reverse light. I used compression nuts to secure the camera so it doesn't fall off when the space is removed. Not an easy task to connect but works great and worth the effort.