Be very careful and study carefully. Thin the grout no more than 1/4 inch thick in 6 hour intervals. And faster, and you defiantly take on a bigger job or abandon your project. Keep the room temperature at 75 degrees (plus 3 minus 1), do not let the room temperature change quickly. Stir slowly for a while, make sure everything is mixed well, don't use a drill (it will add more bubbles) An example of good and bad pouring. Good: Rock hard 6-8 hours after last watering. Bad: Sticky and sticky a few days after watering. . Multiple pours with insufficient cure time or lower room temperature, first 1/4" thick pour after 6 hours, next 1/4" thick pour after 4 hours, third 5/16" thick pour. The last fill dries quickly, which leads to this results in middle fill not drying at all, potentially mixing layers resulting in a softer gel on top Bad: Pour 2" thick. Take a fire extinguisher and hope nothing catches fire. Final product dries in 30 minutes to an hour, not 24 hours. Cracks all over the place as it dries. Imagine throwing molten glass into the freezer, which is in the ice tray. The glass sticks to the tray and breaks as everything cools/ shrinks.
Piece Yellow Contains Remover Finisher
9 Review
π§ͺ Loctite Polyseamseal Adhesive 5.5 oz
10 Review
π οΈ Efficient and Versatile: M D Building Products 71480 20 Feetβthe Ultimate Solution for Your Construction Projects
8 Review
π§° Caulk Cap CCY 2 Sealer Pack" - Optimized Caulk Cap CCY 2 Sealer Combo
10 Review
πͺ FastCap Highbot FC2182 Woodworking Oz
9 Review
π GTD Drip-Free Caulking Cartridge Tapes, Adhesives & Sealants for Newborn 930 Series
10 Review
π§ Homax 5850 10 06 Perfect Caulk Finisher: Achieve Flawless Finishes Effortlessly!
9 Review
π 10-Gallon Newborn 250 Revolving Cartridge
10 Review