Review on Computer chair Duke for the head, upholstery: textile, color: grey 29 by Dagmara Buczko ᠌

Seems like an elevator failure. I measured like this: I sat on a chair, stuck a paint scorch to the upper front edge of the chair, drew a line, took a tape measure, rode the gas lift up and down several times, taking measurements. In the lower position 41, in the upper 45 cm. Forty-five centimeters! The lift stroke is only 4 cm! That's funny! Or is it a marriage? Please, manufacturer, change my chair or gas lift with wheels. There are no complaints about the chair itself. Very soft, wide seat, you can sit cross-legged. Height 180, weight 80. The headrest is exactly under the back of the head. In general, it is very comfortable to sit in it, it is also convenient to lean back, the position is fixed by a lever on the side. According to some reviews, it seemed to me that the back is fixed separately, but no, this is a one-piece structure, the back leans along with the chair, that is, you can’t sleep in it, as some write. The slope is not too big, 30 degrees, but this is enough for comfort. But because of the low height, everything deteriorates, when tilted, the legs do not come off the floor. I don’t know how anyone, but it was important for me that the cross was plastic, so. warm, plus wide legs and ribs on them, in short, you can put your legs there, and they do not slip off. Metallic crunch when you sit down, plus backlash. It does not interfere, I sat on it, and I sit, I do not twitch). But in general the quality is good, if you do not find fault. It was very difficult to collect. I couldn’t myself, I had to call support, it’s stupidly very large and you have to press the back strongly against the seat. It is very difficult to turn the bolts, I cleaned and blown out the holes from the foam rubber, but since the screws were screwed in from the factory, the foam rubber was already clogged. Somehow twisted, really to the bloody blisters. Unwinding the upper structure back will not work without half a liter of water. The assembly design itself, although primitive, but the instructions are not intuitive. In some places I had to use the method of scientific poke, because . I don’t know for whom this instruction was written . or rather, by whom). I will say this - for its price, the chair is normal. But marriage in height saddens.