Review on 🧼 Delonghi Deep Fryer Drain Tube (536159-5512500089) - Efficient Replacement Accessory for Hassle-free Cleaning by Tyler Blake

The oil line on my D677UX was cracked and leaking. Here's the hose. There are no installation instructions for the fryer. There is a screw on the top and right of the tube, remove it and gently pry off the part behind it with a small flat head screwdriver. There are clips holding it. There is a screw on the bottom of the fryer. Use the 3/8 ratchet and remove. Carefully use a small flat head screwdriver under the plastic under the handles and around the part to pry it off. There are clips on the handles and 2 more on the back, next to the entrance of the fork. The bottom and top will be separated BUT the wires are attached and they are still connected through them. Use needle nose pliers to press on the clamp holding the tube to remove it. Apply a small amount of oil to the inside of the tube. This makes gliding easier. Squeeze the clip and place it back onto the pipe before placing it onto the metal pipe from which the old one was removed. An extra pair of hands would be helpful at this stage. Put it back together and you're back in business. I'm a woman and it took less than 10 minutes. Happy roasting!