Review on 🌟 Brickled Light Mustang Model: A Stunning Illuminated Masterpiece by Kyle Mack

I chose this kit over the competition because it was the only one that included both front fog lights and turn signals and also came with lights for the supercharger fog lights and front Turn signals are one zone, dome light is one zone, reverse and reverse lights are one zone, and supercharger is one zone. Each zone consists of a single row of series-connected LEDs connected to a connector hidden in the 1x6 brick. Excess cables and terminal blocks are neatly placed in the trunk of the car. I routed the USB connector on the rear passenger bike into the USB on my desk. My only major gripes with this kit are that there is no wiring guide, it's up to you how you connect it, and a couple of spots are pretty good. Celebration. One of the fog lights is slightly deformed so it likes to pop out when I hold the car. The front turn signals are white LEDs, so I changed the clear lens to orange to match the real one. The reverse lights had a slightly yellowish lens over the white LED, I decided to pry it off as the light looked gross. I didn't originally intend to use a charger with the kit but with the lighting elements I wanted to show I redesigned the compressor to be a lot less cartoony and with the lighting it just looks amazing. My best advice is to give it time and work from start to finish and complete the entire zone before moving on to the next one. Even if you need to unravel previously hidden wires, you will be much more comfortable not untangling them while you work.