Review on 📺 Mounting Dream MD2296-24K: Full Motion TV Wall Mount for 42-70 Inch TVs, Articulating Arms, Max VESA 600x400mm & 100LBS, Fits 16", 18", 24" Studs - Premium TV Bracket by David Hayden

Installed 65" TCL Series 6. Turned out to be perfect. The mount is excellent, very strong, easy to adjust. The guide is Be sure to consider whether the VESA screw holes are in the center of your TV or closer to the bottom of your TV and keep that in mind when determining how high off the floor the mount needs to be or your TV might too ends up. It took me an extra few minutes to measure the whole thing (the VESA screw holes were facing the bottom of the TV) and I subtracted a few extra inches or so from the height I wanted to be at the center of my TV and it came out right where I wanted it because this TCL 6 series hangs higher than a TV with vertically centered VESA screw holes For the center of the TV we d proposed a nominal height of 42 inches. I placed my TV center about 48 inches off the ground. You can definitely hang it with one person because after you install the bracket, you basically hook the TV to the bracket and then clamp it. However, when you attach the TV to the bracket, the TV will tip over under its own weight forward unless you first turn the levers/levers on the bracket to tighten the bracket in the vertical position before placing the TV on it. If you do this first, hook the TV to the sidebar that you can detach (optional) and screw the clips in place to secure the TV to the bracket. You need to use a screwdriver to tighten the clamp and attach the TV to the bracket. A DISADVANTAGE FOR LARGE TVS: If you need to tilt your TV a lot, you can opt for a mount with a longer arm. The bigger the TV, the fewer angles you can tilt so it doesn't hit the wall. In the picture, this was the maximum angle I could tilt my TV to. I would like to get a few more degrees out of that.