Review on 🔍 Cloudray 50mm Engraving Cutting Machine for Beading and Jewelry Making by Kristen Simpson

God what a thick tube! After we received the tube, it was beautifully packaged in a brown box, and inside the brown box was a wooden box, and inside the wooden box we have another box with tons of packaging, so I'll give Cloudray an A for packaging. 80mm. I was upgrading my 60 watt red and black laser and of course I had to make an expansion box for the laser. The only thing I did NOT consider was the mounting bracket, so the mounting brackets I bought were oversized and about 1.25" taller than mirror 1. I had to 3D print my own brackets, so that the laser could hit mirror 1. Tube very high quality, I have found that the minimum trigger for my laser is 15mA, not 5mA as stated in the manual. Make sure you have an AMP laser meter as the maximum MA this tube can handle is 25 MA. With my old 60 watt bulb I was able to crank the thing up to 80% and only get 25mA. This tube delivers 25mA at 45% power. Get a good power supply, most likely you'll need to upgrade to a new one if you buy a bigger tube. I have a 150w Cloud Ray PSU with a digital reader and an external LCD. I also have an analog MA reader, but the digital one works fine, so you can fine-tune your laser and not worry about overloading the tube. Lastly, buy some high voltage connectors. This makes a secure connection that I've seen so many times where people don't secure the connection properly and you have a high voltage arc that can be fatal. Overall I am very satisfied with this tube and can only recommend it. This definitely exceeds the price of Recchi whistles. Overall I am very satisfied with this tube and can only recommend it. This definitely exceeds the price of Recchi whistles. Overall I am very satisfied with this tube and can only recommend it. This definitely exceeds the price of Recchi whistles.