Review on 🚘 Color N Drive Deep Gloss 9H Car Ceramic Coating Paint Protection Kit for Ultimate Color Protection, Scratch Resistance, Stain & Chip Prevention, UV Light Shield, Glossy Finish - Vehicle Care by Chris Drury

This product works very well. And easy to use. Preparing to apply the product is difficult and time consuming. You need about 5-8 hours.1. Wash your car with wax-free soap. I used Chemical Guys.2 citrus fruits. Decontaminate the car with an iron and tar remover spray. I used CarPro Trix.3. Secure the car with ClayBar and Lubricant. I used Chemical Guys.4. Dry the car and buff with a dual action polisher. Depending on the damage to the paint, you may need to use different pads and pastes. I used Chemical Guys v36. Connection with blue hexagonal pad. My car is only a month.5. Disinfect the car of polish residue with isopropyl alcohol. Spray on the towel, not the car. I used the Target brand. First Aid Section.6. Driven Ceramic Coating Color N. Wait about 8-10 minutes after application. You will see haze. Use a LOW-HAIR microfiber towel (short towel) to buff the veil. Don't leave it on for too long, it's very difficult to polish and can damage your car. Seal with CarPro Reload for protection and let the value harden without contamination. This work takes HOURS and requires a lot. Microfiber towels. But the results are great.