Review on 🔺 Front Leveling Lift Kits - 2" for Toyota Tacoma 4WD/2WD (2005-2021, 6 Lugs), 4Runner 4WD/2WD (2003-2021), FJ Cruiser 4WD/2WD (2007-2015) - Dynofit 2 Inch Front Strut Spacer Suspension Lift Spacers by Jacob Seymour

Vehicle info: 2006 Toyota 4runner 4x4 Limited with V8 Rating: The black power coating on the spacer was of good quality. Fasteners - screws, washers and lock washers - were supplied in two bags, one for each gasket. Plus some instructions. Packaging: Much better than expected. Each pad was packed in its own bubble bag with a piece of cardboard separating them. Installation: Pretty easy, no big surprises. The presence of an impact wrench was not required, but it greatly simplified the whole process. Results: As stated in the alignment kit, I measured a 2 inch rise at the front of my 4runner. To my eye, my setup now looks flat (side view - front to back). My goal was to remove the factory rake and straighten out my setup. I'm very happy with the result, the job is done! A: DI has had the alignment kit installed for 2 weeks now. There are no problems, the bolts have not moved yet and are holding tight. I marked all the bolts I removed with a silver marker to see if and how much the bolts move when the hanger settles.