Review on 🔆 Alla Lighting H8 H11 LED Fog Lights Bulbs - Ultra Bright 2800lm, 6500K Xenon White, High Power COB-72 SMD, Perfect Replacement for Cars, Trucks, H16 by Joseph Anderson

2/3/21; the original "Factory" fog light is installed on the left-hand side, and a new LED light on the right-hand side. Wow what's the difference. CURRENTLY. YouTube and others are wrong about installing on a 2021 RAV4, they say you have to enter from the hood area and this is not possible if you have very very small hands and arms. And pressing the pin lever on the front of the electrical connector to unlock it would be Houdini's trick. You rotate the driver's side front wheel inward or clockwise to allow access, then loosen the "Phillips" cap screw/screw on the underside and use a very small thin flathead screwdriver to push out the two plastic rivets and seat the insert and the rivet. together you can remove the other screw at the top after two rivets, but this is not necessary because the fender is deformable. Don't forget to rivet the plastic tab under the fender liner as it will most likely go underneath when you start packing it back. Reassembly: so that the inner rivet is pushed out a little but not all the way, and put the base back into the hole, then put the rivet pin back in. Then on the other side, with the wheel turned in or turned to the left on the passenger side. I chose not to touch the LED, but I'm old school. Man, it was worth it