The temperature setting is excellent. On Gammax L240-v2 at minimum valve and pump speeds of 40 degrees in simple and non-resource intensive tasks. At medium speeds under the same conditions, it produces 32-34 degrees, at room temperature 26 degrees. As long as 40 degrees for him - the temperature is ridiculous, the revolutions without load are set to a minimum so that there is silence. Under load, it warmed up to 60-65. Turnovers, of course, rose, but quickly fell. Under extreme load, it was possible to warm up to 79. Who has 60-65 degrees at idle and 90 under load - check if you set the CO correctly. Is the heat exchanger evenly attached to the processor cover, is the thermal paste applied correctly and . is it applied at all. And whether the selected coolness is suitable for this stone. I wouldn't be surprised if someone tried to put a 65-watt windmill on it. Yes, in my case we are talking about a two-section dropsy, but it was taken more because of aesthetics. It's a 250 watt refrigerator that works exactly like 250 watt towers, no magic. Another thing is that CO must first be chosen correctly, then installed correctly, then configured correctly.
Comprehensive 500pcs Laptop Screw Kit Set for 🔩 IBM HP Dell Lenovo Samsung Sony Toshiba Gateway Acer
12 Review
🖥️ Helifouner 450-Piece Computer Standoffs Spacer Screws Kit: Ideal for Hard Drive, Motherboard, Fan, Power Graphics & Computer Cases
10 Review
MacBook Retina 13-inch (A1425, A1502) and 🔩 15-inch (A1398) Bottom Case Screw Set with Pentalobe Screwdriver
11 Review
M.2 Screw Kit: Easy Mounting for NVMe SSDs on ASUS Motherboards
19 Review