Review on 🌈 Cooler Master MASTERFAN ARGB/PWM Hub - 6-Port Addressable RGB Lighting with PWM (1-to-6 ARGB PWM Hub) by Carl Mayes

The product is excellent, I was able to power all 10 of my fans. I used a 3-way splitter which I daisy chained my last 6, all 10 D-RGB fans to, my D-RGB pump, D-RGB flow meter and D-RGB GPU had water block. The only thing that didn't work was my D-RGB case. which I already had connected to another port on the motherboard, so it wasn't a problem. The problem with this product is simple. D-RGB cables for ALL my devices do not fit into the D-RGB ports on the device. In fact, I had to trim off the excess around the connector to allow the 3 pins to line up and fit into the connector. If you had a main cooler with smaller ports it wouldn't be a problem, but the fact that no other device uses this spec means I'd recommend buying a different product if you don't need the right fans or cooler to do the job Cables may be cut to fit which may void your warranty. a big deal, there are others i have seen that were similar and should have been bought. But I chose a cooler master because I'm probably an old fan lol. Even with Cooler Master 360mm Triple D RGB fans, you need to unplug it for it to work. I would give it more stars if it didn't have this problem, but everything works great, I just use my motherboard software or iCue to control it. Any software should work as long as it can drive D-RGB/RGB motherboards.