Review on Pineeron H11 LED Headlamp Bulb: 9000 RPM Cooling Fan, IP68, 6000K, 4800W, 2 Pack by Daniel Ogbebor

I had high hopes for these as I have installed LEDs in several vehicles and have been fairly lucky to get a good beam pattern from most headlights despite the fact that they are actually illegally operated they were on the street. They always seem to work better with projector style headlights than open reflectors. Installing it on a 2015 Camaro didn't work, but if I ever feel the urge to remove the front bumper to remove the headlights to try again, I might update this review. The ring that snaps into the headlight is the annoying part. You can't just plug everything in like a regular lightbulb. If you install it as an assembly the ring will not snap into place as the bulb only rotates in the ring when you push it forward against the rubber grommet. You must first install the ring yourself, which can be difficult or impossible on many vehicles with limited access and space. I'm not sure if they stay properly aligned after installation as the lamp rotates freely in the mounting ring. The orientation of LEDs makes or breaks them. The alignment pins on the lamp body are different sizes so it might be possible to fix them there somehow as they stop rotating when rotated 180 degrees. but maybe that's not the most important thing. The information on the box does not match the product description. The net claims 45W and 4800W (?!) but the packaging says 30W. The color is even at 6000K. They seemed promising and they can work great in your car if you have easy access to insert the rings and then line up the pins etc. I installed the LEDs much easier. They can be installed on the fog lights - if they work there or I disassemble my car I will update that.