Review on 🔥 Dodge Durango TYC 700009 Replacement Blower Assembly - Enhanced Performance and Efficiency by Justin Gore

Works as well as the original part, if not better. Before you read the short entry. It's not my fault I damaged your car or the fan motor. It is always better to take your car to a professional auto mechanic. For the average person this is not an easy fix, you have to pull the leash to get there. But if you have small hands, you can steal it by removing the glove box, disconnecting the factory booster if you have it, disconnecting the vacuum lines for recirculation. Door. Once removed, remove all 8mm screws and pull the cover straight down, you will then see the fan motor. Unscrew the three screws of the fan and cut the wires from it. On the new fan, pull the pins out of the connector so that the plastic piece is away from the connector. Then, using some good quality electrical tape, attach it to the wires you cut, e.g. B. a lot of tape, z. B. 6-8 inches of wire glued together, and then pull the old one. Pull the cables through the hole on the back of the fan and install them in reverse order. In addition, the fan must be retracted and extended in this way. I have footage of how to make a video that will be up on YouTube soon.