Review on SUPAREE Motorcycle Headlight Davidson Heritage by Ronald Lunn

Installing the 19 Street Glide is easy if you have the right adapter. I didn't have the right adapter. They sent H13 3 Pin. Anyone ordering a Rushmore bike up will need a 14 pin to 4 pin connector. I removed my adapter from the bike and H13 and combined them. Tip: DRL is available via a 4 pin 14 up connector , so you will need this connector.I still gave five stars for saying H13 but I was not informed on time or to order.It took me 20 minutes to look at all the cables that were delivered and removed from the bike to figuring out what to do and to get a strong cable with no cuts.All of these connectors have tabs that allow for complete disassembly to swap cables or replace with other connectors.Light. It's very bright. The DRLs are amazing, like the fog lights on a bike. If you wanted, you could turn on the daytime running lights and turn off the low beams during the day. It needs some extra tweaking, just saying it's so bright. Riding at night. From Stock Light to this setup, I had to make small adjustments. During my test in the garage, I could see this before the installation was complete. When I did that everything was fine. I have two friends who ride a Road Glide with factory LEDs and the other who rides an Ultra Limited with Daymaker and Custom Dynamics pass-through lights. With the Road Glide I was significantly better in the low and high comparison. The low beam Daymaker was only brighter, but the light pattern was so close that we both said both were fine. Do some extra work and adjust the turn signals. This is a trick. I still kept my bullets because bigger is better IMO. I hope to come back next summer 2020 and update long term.