Review on Bikers Choice Electronic Custom Tachometer by Jon Ford

Installation was easy. Here's how it works: In the junction box between the front turn signals - there is a green splitter in the box, which serves as a ground for the turn signals. Use it for the black wire from the tachometer. Follow the lock down, there is a red and black wire that you will want to use for the red and blue wire from the tachometer. At this point you can see your tachometer "boot up". top" and the light inside should be on. That last wire is tricky, many of us couldn't get it to work without a coil as advertised. Hook it up to a pulse generator instead and it works like a champ. Below There is a 2 wire plastic connector on the gas tank covered with a clear plastic protective cover. There you will see a blue and yellow wire. Just touch that wire and it should work slightly. Finally, when you install the Lockitt POSI-TAP Assortment Pack 10- Buying 22 AWG connectors from Revain makes cutting wires a perfectly trivial task, you need both red and blue.