Review on 🔊 3000W Wireless Bluetooth Home Stereo Amplifier - Hybrid Multi-Channel Power Amplifier System with AM/FM Radio, MP3/USB, AUX, RCA, Karaoke Mic Input - Rack Mountable, Remote Control - P3301BAT by David Plunkett

Purchase at your own risk, purchase this amp. Monday 01/20/20. Plugged in and none of the subwoofer outputs work (with or without RCA Y-cables, right + left. subwoofer. out. or single mono subwoofer) 2) had to use rec. Subwoofer line outs. So Sub The level control is useless. 3) Wanted to unplug the RCA cable from the input jack on the back of the receiver and the RCA output grounding sleeve came loose with the jack! 4) I use this to power 2 - 350W 4 ohms. rebuilt Infinity SM 150, each cabinet has a 1-15" red cone woofer, 2 - 5, 25" sealed Goldwood midrange drivers (with Infinity L-Pad crossover) and 1 Infinity Polycell High Output soft dome tweeter (also with L-Pad Xover tweeter) only 500 watts per cabinet. 5) The volume knob has no start and stop, it just keeps turning until the desired volume is reached. And further 6) if it's 3000 watts, then I'm deaf. The max volume is 65 (default is 20) and I have to run this at 55 to practice my drums. My 200 watt Sony has a lot of power and will push 8 ohm boxes (3-way) 7) The only useful feature is the volume button on the remote which increases the volume a bit. I will be returning this for a replacement (maybe the same model?): :))))))) upgrade/amplifier. rec. The line outputs are the subwoofer outputs of the P3301bat, that I received. and under. The level control works when my active subwoofer is connected to rec. line outputs. So I think the subwoofer outputs on the back of the amp are for recording. And rec.out(line) for the subwoofer. t cannot reach sustained high volumes. After all, there is no clipping, no overheating and no switching to protection mode. Pyle is just an amp with preamp capability. So you need a 5.1 or 7.1 home theater receiver to get a true home theater experience. So keep that in mind. If you are looking for a 4 channel line out amplifier + subwoofer then this is it. If you want a home theater, you need to use a receiver. As mentioned above, a great amp line output so far. so i think that the subwoofer outputs on the back of the amplifier are for recording. And rec.out(line) for the subwoofer. t cannot reach sustained high volumes. After all, there is no clipping, no overheating and no switching to protection mode. Pyle is just an amp with preamp capability. So you need a 5.1 or 7.1 home theater receiver to get a true home theater experience. So keep that in mind. If you are looking for a 4 channel line out amplifier + subwoofer then this is it. If you want a home theater, you need to use a receiver. As mentioned above, a great amp line output so far. So I think the subwoofer outputs on the back of the amp are for recording. And rec.out(line) for the subwoofer. t cannot reach sustained high volumes. After all, there is no clipping, no overheating and no switching to protection mode. Pyle is just an amp with preamp capability. So you need a 5.1 or 7.1 home theater receiver to get a true home theater experience. So keep that in mind. If you are looking for a 4 channel line out amplifier + subwoofer then this is it. If you want a home theater, you need to use a receiver. As already mentioned above, a great amp so far, no clipping, no overheating and no switching to protection mode. Pyle is just an amp with preamp capability. So you need a 5.1 or 7.1 home theater receiver to get a true home theater experience. So keep that in mind. If you are looking for a 4 channel line out amplifier + subwoofer then this is it. If you want a home theater, you need to use a receiver. As already mentioned above, a great amp so far, no clipping, no overheating and no switching to protection mode. Pyle is just an amp with preamp capability. So you need a 5.1 or 7.1 home theater receiver to get a true home theater experience. So keep that in mind. If you are looking for a 4 channel line out amplifier + subwoofer then this is it. If you want a home theater, you need to use a receiver. as mentioned above great amp so far you have to use a receiver. as mentioned above great amp so far you have to use a receiver. As mentioned above, a great amp so far As already mentioned above, a great amp so far, no clipping, no overheating and no switching to protection mode. Pyle is just an amp with preamp capability. So you need a 5.1 or 7.1 home theater receiver to get a true home theater experience. So keep that in mind. If you are looking for a 4 channel line out amplifier + subwoofer then this is it. If you want a home theater, you need to use a receiver. as mentioned above great amp so far you have to use a receiver. as mentioned above great amp so far you have to use a receiver. As mentioned above, a great amp so far As already mentioned above, a great amp so far, no clipping, no overheating and no switching to protection mode. Pyle is just an amp with preamp capability. So you need a 5.1 or 7.1 home theater receiver to get a true home theater experience. So keep that in mind. If you are looking for a 4 channel line out amplifier + subwoofer then this is it. If you want a home theater, you need to use a receiver. as mentioned above great amp so far you have to use a receiver. as mentioned above great amp so far you have to use a receiver. As mentioned above, a great amp so far So you need a 5.1 or 7.1 home theater receiver to get a true home theater experience. So keep that in mind. If you are looking for a 4 channel line out amplifier + subwoofer then this is it. If you want a home theater, you need to use a receiver. as mentioned above great amp so far you have to use a receiver. as mentioned above great amp so far you have to use a receiver. As mentioned above, a great amp so far So you need a 5.1 or 7.1 home theater receiver to get a true home theater experience. So keep that in mind. If you are looking for a 4 channel line out amplifier + subwoofer then this is it. If you want a home theater, you need to use a receiver. as mentioned above great amp so far you have to use a receiver. as mentioned above great amp so far you have to use a receiver. As mentioned above, a great amp so far as mentioned above great amp so far you have to use a receiver. as mentioned above great amp so far you have to use a receiver. As mentioned above, a great amp so far as mentioned above great amp so far you have to use a receiver. as mentioned above great amp so far you have to use a receiver. As mentioned above, a great amp so far