Review on 📸 Neewer Black Metal Cold Shoe Flash Stand Adapter: 2 Packs with 1/4-inch -20 Tripod Screw by Mirzet Gosselin

UPDATE > I found something better: DSLRKIT Quick Hot Shoe Flash Stand Adapter with 1/4"-20 Tripod Screw (2pcs) ].MY EXPERIENCE > I needed a way to hold the Flash securely on the mount and you can also use it for almost any photo for better modeling The flash 'keeps falling out' The Neewer Cold Shoe Flash Stand Adapter was an improvement but no matter how tight I screwed it up put it on , the flash would "fall out" from time to time. ----------------------- ------------------------- ----------- DESCRIPTION > 1 1/4" wide X 3/4" deep X 5/8" high > Adjustment knob 5/16" diameter CONS > Locking knob too small to tighten > Since there is no stopper, Ash's "leg" can slide through it, so it's important to tighten it properly.The adapter attaches to other equipment with a 1/4" x 20" thread . If you keep opening and closing the "adapter” by e.g. For example, holding the flash between shots and removing the flash with each shot, a similar mount with a "finger-friendly" grip will work for you. [[ASIN:B007XWTBIK HDE® Shoe Mount with Adjustable Bracket.> A small amount of silicone grease applied to the work surfaces (where two metal surfaces touch) will make the movement smoother - but be sure to remove ALL excess - you win I don't want to risk getting grease on my camera lens Permatex PERMATEX DIELECTRIC GREASE 22058 .> I glued a 3/8" nut onto the grip to expand it to 3/4" in diameter. The new "big knob" works really well, I can tighten or loosen the screw with my finger. JB Weld 8265S Original Steel Reinforced Epoxy Twin Pack - 2 oz. But this adapter, combined with 2x Mini Black Double Screw Angle 1/4" Hot Shoe Mount Adapter Holder, AGG1451, AGG1451, allowed me to create a metal connection that is not easy to break. >Click "Stoney" " right below the product name to see my feedback from others or leave a comment to ask a question.