Review on 🔌 Switch Female Terminals - Socket Module with Enhanced SEO by John Roberts

Good solid construction and universal approach with socket, fuse and switch saves space in my project. In general very satisfied. As others have pointed out, there is a problem with this module, which is that the light is always on whether the switch is in the 'on' or 'off' position. This is because the switch is connected in reverse. To fix this so that the light is only on when the switch is in the ON position you need to swap the red/blue wire pair with the black pair where they connect to the switch. So when you look at the back of the module with the switch down, out of the box the black wires are on the left and the red/blue wires are on the right. Disconnect the red/blue pair on the right, move the black pair to the right, and reconnect the red/blue pair on the left (see photo). This is an easy fix, although you may need a pair of small pliers. to disconnect the plugs from the switch. Also, when swapping pairs of wires, make sure the wires of "each pair" are in the same position to maintain the hot-to-neutral ratio.