Review on 🏠 Sengled Industrial Electrical SmartThings Compatible Assistant: The Ultimate Solution for Home Automation by Joe Duncan

The light works well and connecting to my Echo Plus is not easy. Step one. Download Alexa app on your phone and enable "skill" for sengled2. Turn the light on and off 10 times faster (the bulbs indicate it worked by flashing 5 times). This will reset the lightbulbs and allow my lightbulbs to be detected in my Alexa app which will blink 3 times when detected3. Click the tool icon in the lower right corner, add device, add device again, select light, select Sengled, ignore the 4 steps shown (light on and now 10 times) and click "Detect devices" at the bottom Lights flicker when they can be recognized and found under Devices6. Select "Add Device" again but then "Add Group" and choose a name for the room the light is in and select all the lights you turn on at that switch 10 times. and turned off, and the app always lists them together in this group for convenience. Turn on and off with your voice or app. The only downside to the light is dimming. If you ask Alexa to turn off the light, 25% will appear (based on regular incandescent and dimmable LED bulbs), they will go off at 10%, 50% will appear like 35%. %, and my film setting is 1%, which is about 15% for other lightbulbs and dimmers (of which I have 10 different ones at home). They don't adjust very well with the slider, but if you put the slider in the right spot before you turn on the light, they go to that setting. If they don't drop below 20%, they won't spawn at all.