Review on 🎮 MSI RTX 3080 Ti Ventus 3X 12G OC Graphics Card | Gaming GeForce RTX 3080 Ti with 12GB GDRR6X | Ampere Architecture, Nvlink, HDMI/DP, Tri-Frozr 2 | Improved SEO by Adam Paka (Adam Trab ᠌

In general, I bought this miracle for 43 thousand on ebay, after mining, but in a complete set and not even with leaking gaskets. I started to drive in games and then I got crazy - the GPU temperature was 85, and the memory easily reached 105 degrees, which is just hell and darkness) Moreover, the fans and their number in the computer did not greatly affect the situation. The Corsair Crystal case - the distance from the vidyuhi to the box with the power supply is small, and the design of the video card itself and its quality are not so hot. There is a very hot memory - this time, and it is terribly cooled for two reasons. 1. Only 8 watts of thermal pads from the factory! It's just a nightmare. 2. Stopfan and other settings are too rough, resulting in either silence and heat, or howl and heat. Therefore, the first thing we buy is powerful thermal pads for 20-40 watts. Odysseus, frozing, but best of all zezzio. We carefully disassemble the vidyuhu, there are vidos on YouTube. We only change the thermal paste on the same MX4 chip and change the gaskets on the memory. We assemble it back and voila - now the furmark in 4k resolution gives out only 75 degrees on the chip and 70 on the memory! Cyberpunk heats everything up to 80. We put the msi afterburner, set up all the coolers separately according to the following scheme - 30 degrees - 35 percent in increments of ten to 90-95, respectively. As a result, we enjoy both cold and silence. In general, the card is excellent, only from the factory it is not brought to mind. Well, yes, if you disassemble the card, you will lose the warranty, so it's up to you to decide. I also recommend powering the card from two different cables. This will greatly reduce the risk that the connectors will melt. The card quietly eats its 320 watts)