Review on 📺 PSMFK13 Full Motion TV Wall Mount: Swivel, Tilt, Articulating Bracket for 17-55 Inch TVs - Max VESA 400x400, Holds up to 88 lbs by Mark Morrow

Moving TV from stand to wall mount - Vizio 55". I only had one bolt within reach of the mounting legs. Wall mount this. I chose 3 structural Head screws decided and the stud mount centered by pre-drilling the holes and that's all you need to hold the TV in place - it's very solid, you'll need to drill holes in the center of the mount for the screws to pass as the square holes are too small, increase the diameter of the drill bit by 2 sizes compared to the diameter of the 1/4 screw and don't over tighten the screws, just push them firmly into the bracket with it it does not deform.It took less than 5 minutes to fix it on the wall.It took a little longer to install the bracket on the TV,and after that it was a bit strenuous to keep the tv level after installing it on the bracket. You must tighten the screws once you reach the TV level, otherwise it will fall off. ut square every time you move it. There's also plenty of room behind the TV to mount a crockery rack - we have a crockery rack at this point, now attached to the top of the non-visible bracket. It's a simple solution and a beautiful product.