Review on 🔑 KeylessOption Keyless Entry Remote Control Car Key Fob Replacement Pack (2) for 16245100-29 by Jay Hill

Easy to program - 1999 GMC Yukon Took me 3 minutes including 1 minute to find the paper clip. Assemble all remotes to be used as entering programming mode by bridging pins 4 and 8 will erase all fobs from memory. Install a jumper or paperclip between pins 4 and 8 of the OBD-2 connector. (Pins 1-8 are left to right on the wider side of the connector. Pin 8 is to the right. Pin 4 is to the right of pins 1, 2, and 3 :) On my car, this was the top of the connector. 2 rows of pins on connector.) The latches will move when the jumper is inserted, confirming the vehicle is in programming mode. (If the locks don't move, make sure you jump over the correct pins) Press and hold the lock and unlock buttons together on the 1st key fob for 10-15 seconds until the locks move. release keys. That's it, the next remote control. Repeat this for each remote control. Remove the jumper. Test each remote control.