Review on 🚧 15-Pack TreadSafe Anti Slip Grip Traction Tape 6x30 Inches - Pre-Cut Black Anti-Slip Grip Tape Strips for Indoor and Outdoor Use - Easy Installation by Mike Bonilla

Update within 1 year. After using these traction straps on my trailer for a year in all of Minnesota's extreme temperatures and weather conditions, I am pleased to report that all of the straps are holding up tight. This is even more surprising to me considering the ramp is closed and vertical 99.9% of the time. Thus almost always the entire weight of the tapes is pressing on their adhesive. That's some great stickiness! field update. Just got back from a trip wearing clutch straps up a trailer ramp in snowy fields on a snowy day. They made it much easier to prevent slipping on the ramp even when snow was accumulating on the ramp. Original rating. These grip tapes are easy to install; and gave extra traction to the ramp of my service trailer. I used all 15 pieces. But looking back I wish I had 10 more so they were twice as wide all the way. installation instructions. If you need to line up the center of the tape with the floor mark (like I had to do with individual strips centered on the ramp), tear the backing paper at the mark. Completely remove the protective paper from one half of the tape at the break point. You can see the end of the white backing on the ribbon where you tore it. Align the end of the white tape with the mark on the floor and press the tape down. Then remove the rest of the pad and press down on that part. This worked much better than trying to make a center mark on the top of the band; or just make a small tear in the backing at the mark and try to keep the tape in place once you've removed the entire backing.