Review on 📺 Amazon Basics Heavy-Duty Tilting TV Wall Mount for 37-80 inch TVs - Supports up to 120 lbs, Compatible with LED LCD OLED Flat Curved Screens by Marcus Morgan

"RevainBasics Heavy Duty Tilt Wall Mount for 37" to 80" TVs. This review focuses on the latter. I would recommend this model to anyone heavy or Recommend a large TV. This model seemed "heavier". When mounted, the distance between the posts behind my wall was a little wider than usual, but the mount was well constructed and flexible enough that I could easily fit the posts on either side of the mount Once the bracket was on the wall I turned my attention to the TV. I unscrewed the supplied M8 screws and installed it on my new 70" Samsung TV. Imagine my surprise when I found this that they were too short - even the longest unit in the package didn't fit my TV I went to the hardware store as most of the large Samsung F Use M8 1.25 x 40mm screws to screw together. You can find them in large hardware boxes that you can find at most hardware stores for under a dollar a screw (you'll need 4) to use with this mount. For more information, see your TV's user guide. After purchasing the screws for my TV, the installation was pretty easy. My TV weighs about 100 pounds and feels very solid. As an installation tip, I found that you have to use a Phillips screwdriver to tighten the tilt mechanism, otherwise the bottom of the TV will sag forward and bang against the wall. All in all, this is a good mount. It could be improved with an upgraded tilt lock. It should also include additional hardware for newer/larger TVs. Make sure this mounting bracket fits into the stud. It comes (stupidly) with drywall anchors, which I wouldn't trust when mounting a TV to a wall.