Review on 🌡️ GlowShift 44mm Radiator Hose Attachment Adapter with Hose Clamps for Water Coolant Temperature Gauge Sensor by Madansaireddy Aldridge

1) Poor quality control. The sensor hole was drilled at a slight angle so the sensor does not screw in completely flush with the surface. 2) Obviously only made for a two wire sensor. My transmitter only has one wire, so I had to drill about 3/8" into the top and cut a hole for an #8-32 mounting screw to place the ground wire on the unit. 3) The paint was on the inside of the sensor. a hole in the transducer to prevent metal-to-metal contact between the transducer and the block, which is necessary for good ground contact. I had to clean the threads with a 1/8" NPT tap. I didn't have to do all that extra work to get my single wire sensor working with this block.