Review on 🔄 Pre-2009 Plastic Replacement Upgraded Stainless Steel by Kevin Hawkins

Okay, the yellow threaded screw caps are too high to screw in far enough to tighten the spout and secure it to the glass. BUT, 3 different jars with 3 different spouts and I was able to use the lids from each to ensure a perfect seal. Full 5 gallon cans turned upside down and no leaks with screw tops, nice feature. Use a 1/2" drill bit for the vent holes, it should pull the plastic right out. Then BFH plug the vent sharply, also tightly closed. Good product, yellow caps should be about 1/8th. 1/4 inch smaller.